|
This fence is based on a popular Australian suburban fencing brand. It fits well in suburban and industrial environments. This pack is heavily optimized, with all meshes relying on only a single material and texture set. The master material is extensively designed with over 64 controllable parameters, allowing you to add or remove features as you please.
Simple but effective modular-building blueprint included. This blueprint allows you to quickly switch material variations, swap between damage variations, and to build in different directions.
Four albedo masks are included to allow you to choose any colour combination you like
Four dirt masks allow you to dynamically control levels of dirt on the posts and fence separately
Seven roughness masks allow you to apply different levels of damage types to the fences, make them look factory new or decades old
Customizable rust mask allows you to dynamically add rust with custom normals and roughness over your model
64 Controllable material parameters ranging from 157 to 229 instructions )with all masks and features enabled).
All textures and masks are provided in 4k, aside from the rust, which is a tiled 2k texture.
There are six base models, with six damaged variations included. When separated into modular pieces, they snap onto a 10cm grid, and can take connections from either left or right. The modular segmented static meshes break down into 16 modular undamaged models, and 12 modular damaged models.
*warehouse not included
技术细节
Number of Unique Meshes: 40
Blueprints: 1 Modular Building Blueprint included for easy world building
Collision: Yes, AutoGenerated
Vertex Count: ~2k to 100 for undamaged models, ~4.9k to 400 for damaged models
LODs: 4 per mesh
Number of Materials and Material Instances: 1 Master Material, 14 example instances included as a guide
Number of Textures: 13
Texture Resolutions: 11 @ 4k, 2 @ 2k
Supported Development Platforms: Tested on Windows, optimized for all platforms
这种围栏以澳大利亚郊区流行的围栏品牌为原型。它非常适合郊区和工业环境。本软件包进行了大量优化，所有网格只依赖于单一的材质和纹理集。主材质经过广泛设计，拥有超过 64 个可控参数，让您可以随心所欲地添加或删除功能。
包含简单而有效的模块化构建蓝图。通过该蓝图，您可以快速切换材料变化、交换损坏变化，并从不同方向进行构建。
包含四个反照率遮罩，让您可以选择任何喜欢的颜色组合
四个污垢蒙版可分别动态控制柱子和栅栏上的污垢程度
七种粗糙度遮罩可让您对栅栏应用不同程度的损坏类型，使其看起来像新出厂的一样，或者像几十年前的样子
可定制的生锈蒙版可在模型上动态添加具有自定义法线和粗糙度的生锈效果
64 种可控材质参数，从 157 到 229 种说明不等（已启用所有遮罩和功能）。
所有纹理和遮罩均以 4k 格式提供，只有铁锈纹理是平铺的 2k 纹理。
共有六个基本模型，其中包括六个损坏的变体。这些模型被分割成模块化片段后，可卡在 10 厘米的网格上，并可从左右两侧进行连接。模块化分段静态网格可细分为 16 个未损坏的模块化模型和 12 个损坏的模块化模型。
*不包括仓库
技术细节
独特网格数： 40
蓝图： 包含 1 个模块化建筑蓝图，可轻松构建世界
碰撞 是，自动生成
顶点数： 未损坏模型 ~2k 至 100，损坏模型 ~4.9k 至 400
LODs： 每个网格 4 个
材质和材质实例数量 1 个主材质，包含 14 个示例作为指导
材质数量 13
纹理分辨率 11 个 4K，2 个 2K
支持的开发平台： 已在 Windows 上测试，针对所有平台进行了优化
|
|
